0

1-888-392-7867
For assistance, call toll free

Rolling Warehouse Ladders

17 Item(s)

List  Grid 

Set Descending Direction
  1. M-2000 ROLLING SAFETY LADDERS

    • Easy to use footpedal activated lockstep
    • Features 14"D. top step.
    • Ladders ship knocked-down cost
    • Perforated tread standard or specify alternate tread
    • Manufactured with rigid 1” OD tubing
    • 350 lbs. Capacity
    • 30” handrails (measured from front of step)
    • Built to OSHA and ANSI standards
    • CAL OSHA available 6 - 9 step & 10 + step - (See Options)
    • Standard finish is powder coat grey
    • Shipping ladders knocked-down (KD) provide substantial freight savings.
    • Ballymore’s knocked-down design features step by step assembly instructions with detailed photos included
    • Special fasteners welded at strategic positions allow ladder to be partially disassembled
    • Shortest re-assembly time in the industry (60% to 80% faster than our competitors)
    Learn More
  2. EXTRA HEAVY DUTY 450 LB. and 600 LB. CAPACITY LADDER

    • 50° stairway slope, allows forward facing descent
    • Easy to use foot pedal activated lockstep
    • 14" deep top step standard
    • 21" and 28" deep top steps available
    • 450 or 600 lbs. capacity
    • Perforated tread standard or specify alternate tread
    • Ships unassembled for freight cost savings
    • Gray powder coat finish
    • Available with Rear Guardrail removed for easy walk through
    • Built to OSHA and ANSI standards
    • CAL OSHA available

     

    Options:

    1. 21" Deep Top Step
    2. 28" Deep Top Step
    3. All Directional (360 rotation)
    4. Side Exit ... includes required 28" DTS
    5. Rear Exit ... includes required 28" DTS and box/skid
    6. Boxing (For additional shipping protection)
    7. Skidding (For additional shipping protection)
    8. Employee Only Sign
    9. CAL-OSHA Compliance
    Learn More
  3. MONSTER LINE ROLLING SAFETY LADDER EXTRA HEAVY DUTY 600 LB. CAPACITY LADDER

      STANDARD FEATURES:

      • 21" Deep top step.
      • Base frame and rear vertical are rugged 2" x 1" rectangular tubing.
      • 59° Slope.
      • Weight actuated lockstep.
      • High quality non-marking wheels with roller bearings and dust cover.
      • Rear corner bumpers.
      • Tough Power Coat Gray Finish.
      • Exceeds OSHA and ANSI standards.
      Learn More
  4. STEEL ROLLING WAREHOUSE LADDERS

    Louisville Ladder steel rolling warehouse ladders are considered one of the best on the market. Ladder equipped with ball bearing casters allowing easy movement to any area. Rugged all steel construction. Sturdy handrails, easy 56 degree climbing angle, "Sure Grip" tread, 7" deep steps and 10" deep top platform provide quality features for the everyday user.

    • Spring Loaded Casters
      (standard on 2-step to 5-step models) Four spring loaded casters on 2-5 step models. Casters retract when load is placed on the ladder, setting the ladder firmly in place on rubber tips.When the load is removed, springs push down the casters enabling the ladder to move about freely.
    • Locking Device
      (standard on 6-step to 15-step models) Models 6-step and taller come equipped with a large 4" swivel caster in front and rigid casters in the rear. Stepping on bottom step activates the locking mechanism, locking rubber tipped feet in down position. To move the ladder, just step on the unlocking pedal.
    • Premium Powder Paint
      Baked-on finish is durable and provides superior scratch and scuff resistance. Attractive, even coverage with no drips or runs.
    • No Forward Descent
      56 degree climbing angle does not meet ANSI requirements for forward descent.
    • Toeboard
      (standard on 12-step to 15-step models) The top platform on models 12-step and taller is surrounded on three sides by a 4" high toeboard. Can be added as an option to smaller size models. (WO5)

    ALL SIZES MEET OR EXCEED THE REQUIREMENTS OF ANSI A14.7 AND OSHA 1910.29 STANDARDS WITH A 350 LB. LOAD RATING

    Learn More
  5. PIVOTING ALL DIRECTION LADDERS

    • Pivots in its own radius.
    • Easy to use footpedal activated lockstep.
    Learn More
  6. GILLIS 60° STANDARD ANGLE LADDERS

    • Meets or exceeds OSHA or ANSI standards.
    • Features double-deep top step.
    Learn More
  7. GILLIS 60° "6-WHEELER" SAF-T-LADDERS

    • Ideal for applications with narrow aisles or confined space.
    • Turns in 1/2 the radius of standard ladders.
    Learn More
  8. 50° SAF-T ANGLE LADDERS

    • Allows workers to face outward while descending.
    • Heavy duty self-cleaning treads are available in two styles.
    Learn More
  9. WEIGHT-ACTUATED ROLLING SAFETY LADDERS

    • NEW State of the art lock step design provides exceptional safety by automatically dropping the ladder to the climbing position with it's feet firmly on the floor when weight is applied to the stair section.
    • Easy to use, a single pedal raises the ladder to the rolling position and the users weight automatically locks the ladder to the floor for climbing.
    • Durable this next generation lock step has been robotically tested:cycling over 60,000 times.
    • 14" Deep Top Step Ladders have option to ship in a box to reduce freight expenses and the risk of shipping damage. 21" and 28" DTS ship in a box.
    • Heavy-duty, 450 lbs load rating
    Learn More
  10. EGA 60-Degree Standard Slope Ladders

    2 to 4 Step Ladders

    Feature 3" spring-loaded casters.

    EGA 60° Standard Slope Ladders with 2 to 4 Steps roll easily, yet lock securely in place. Rugged construction: 1" square tubular steel handrails and frame are 40% stronger than round tubing. 2- to 4-step ladders feature spring loaded locking casters. Four casters supplied on all ladders. Perforated stair tread gives assurance of a solid step with the convenience of 1"Lx3/8"W perforations for slip resistance and prevention of dirt build-up. Grip-Strut® treads offer extra slip resistance in wet working environments. 7" deep steps, 9" top platform. Legs of ladders are equipped with rubber tips for extra safety. Welded sub-assemblies for extra strength. Hand rail is 30" above platform for extra protection. All ladders meet OSHA standard 1910.29 and ANSI standard A14.7-1991. Oversize top platforms available in depths of 21", 28", and 35". All-welded versions of ladders available upon request.

    NOTE: number of steps listed in chart includes top platform. Most ladders ship via small package carrier, 2- and 3-step without handrail ship completely assembled. 3-step with handrails ships unassembled.

    5 to 12 Step Ladders

    Includes Ezy-Lock with 4" casters.

    5- to 12-Step (unassembled) ladders are shipped in protective crating.

    EGA 60° Standard Slope Ladders with 5 to 12 Steps roll easily, yet lock securely in place. Rugged construction: 1" square tubular steel handrails and frame are 40% stronger than round tubing. 5–7-step ladders feature heavy-duty EZY LOCK first step, allowing easy operation—no bending, foot release—low maintenance. Four casters supplied on all ladders. Perforated stair tread gives assurance of a solid step with the convenience of 1"Lx3/8"W perforations for slip resistance and prevention of dirt build-up. Grip-Strut® treads offer extra slip resistance in wet working environments. 7" deep steps, 9" top platform. Legs of ladders are equipped with rubber tips for extra safety. Welded sub-assemblies for extra strength. Hand rail is 30" above platform for extra protection. All ladders meet OSHA standard 1910.29 and ANSI standard A14.7-1991. Oversize top platforms available in depths of 21", 28", and 35". All-welded versions of ladders available upon request.

    NOTE: number of steps listed in chart includes top platform. Most ladders ship via small package carrier, 2- and 3-step without handrail ship completely assembled. 3-step with handrails ships unassembled.

    7"D steps. 30" top handrail. Oversize top platforms available in depths of 21", 28", and 35". All-welded versions of ladders available upon request.

    5-step and higher unassembled ladders are shipped in protective crating.

    Specify tread: (01) perforated, (02) Grip-Strut®.

    Learn More
  11. SPRING LOADED CASTER LADDERS

    • Mounted on 4 spring loaded swivel casters that retract under the user's weight.
    Learn More
  12. TILT & ROLL LADDERS

    • Balanced design allows ladder to tilt easily and roll effortlessly on 2-4" casters.
    • 24" W. Treads
    Learn More
  13. VESTIL Tip-N-Roll Mobile Ladders

    Straddle Base Ladders.

    Includes removable 24x10" tool tray. 60° standard slope, perforated tread only.

    Yes
    GILLIS Straddle Base Tip-N-Go Mobile Ladders are ideal for cluttered areas or ones with permanent obstacles. Pull industrial ladder forward onto its 4" front-mounted wheels and transport where you need it. Once in position, ladder rests securely on four large-crutch tips for maximum stability. Include 7"D steps and a 14"D top platform. 1" round steel tube construction supports up to 300 lbs. Meets ANSI A14.7 and OSHA 1910.29 regulations. Includes removable 24x10" tool tray. 60° standard slope with perforated treads.

    Non-Straddle Base Ladders.

    Specify slope and tread: 60° Standard Slope (01) perforated tread, (02) serrated tread; 50° Stairway Slope (03) perforated tread, (04) serrated tread.
    GILLIS Tip-N-Go Ladders are perfect for standard applications. Pull industrial ladder forward onto its 4" front-mounted wheels and transport where you need it. Once in position, ladder rests securely on four large-crutch tips for maximum stability. Include 7"D steps and a 14"D top platform. 1" O.D. steel tube construction supports up to 300 lbs. Meets ANSI A14.7 and OSHA 1910.29 regulations. NOTE: Base dimensions listed are for standard angle. For Saf-T-Angle, add approximately 10%. Call for exact dimensions.

    Choose straddle base for areas with permanent obstructions or non-straddle base for standard applications. 4" front-mounted wheels. Extra-large rubber feet. 7"D steps.

    5-step and higher unassembled ladders are shipped in protective crating.

    Learn More
  14. High-Vis. Rolling Ladders

    All-directional spring-loaded casters with dome protection and rubber-pad bottoms. Powder coat finish. Color: high visibility yellow.

    (See page 514 for Ladder Selection Guide)

    Yes
    These High-Vis. Rolling Ladders are an attractive, economical alternative to traditional rolling ladders.

    All-directional spring-loaded casters are enclosed in a steel cup for protection. Bottom of cup includes rubber ring for extra grip. Round tube, all-welded construction. 58° slope. Perforated tread. 300-lb. capacity. Powder coat finish. Color: high visibility yellow.

    Learn More
  15. FOLD-N-STORE ROLLING LADDER

    • Ladder can be easily folded for storage or transportation.
    • Provides tilt and roll mobility when set up.
    Learn More
  16. ALUMINUM LADDERS-WHEELBARROW STYLE

    • Lightweight, corrosive resistant ladder is ideal for outdoor requirements.
    • Ideal for rough surfaces - comes standard with skid plates and 10" rubber wheels.
    Learn More
  17. VESTIL Port-O-Fold Mobile Ladders

    Two 10" hard rubber wheels mounted on rear legs. 7"D steps; 17"Wx14"D top step. 30"H removable handrails. Color: blue.

    (See page 514 for Ladder Selection Guide)

    Specify slope and tread: 58° Standard Slope (01) Perforated, (02) Grip-Strut®; 50° Stairway Slope (03) Perforated, (04) Grip-Strut®.
    Yes
    Portable, but strong VESTIL Port-O-Fold Mobile Ladders fold for convenient transportation and storage.

    Industrial ladders set up or fold down with just four bolts. 1" square tube steel framework is stronger than round tubing. Two large 10" hard rubber wheels mounted on rear legs roll easily over rough terrain. 7"D steps. 17"Wx14"D top step. 30"H removable handrails. 300-lb. capacity. Choose 58° standard slope or 50° stairway slope. Color: blue. Ships unassembled.

    Learn More

17 Item(s)

List  Grid 

Set Descending Direction