0

1-888-392-7867
For assistance, call toll free

Pallets

25 Item(s)

List  Grid 

Set Descending Direction
  1. ORBIS Economical Structural Foam Pallet

    Reusable. Four-way fork access. Color: black.

    Quick-Reference Guide for All Plastic Pallets
    Capacity Definitions:
    Fork—The maximum weight capacity that can be sustained by a pallet during transport on a forklift, a hand jack, or in a truck. Also called dynamic capacity.
    Floor—The maximum weight capacity that can be sustained by a fully supported pallet, i.e. one resting on the floor or stacked for a long period of time. Also called static capacity.
    *Note: Capacities only apply when load is evenly distributed
    Manufacturing Process Definitions:
    Structural Foam—Plastic and gas are injected into a mold. These materials combine to create a cellular core surrounded by a smooth outer skin. Offers high floor load capacity.
    Solid-Wall Molding—Powdered plastic is added to a closed-cavity mold and the mold is rotated on all axis while heat is applied. The mold is then cooled. This produces a solid wall, hollow plastic part. Offers high-impact strength and long life.
    Extrusion Molding—Plastic pellets are melted and extruded through steel dies forming a solid wall hollow pallet profile. Economical.
    Injection Molding—Plastic is injected, under pressure, into a mold. This process produces a solid wall, solid core part. Offers high durability.

    IN STOCK.
    ORBIS® Economical Structural Foam Pallet is a low-cost solution for storing loads up to 30,000 lbs.

    Heavy-duty solid body plastic pallet is constructed of 100% recyclable high-density polyethylene structural foam. Smooth surface protects stored products, and is reusable eliminating disposal costs associated with wood pallets. Four-way fork and pallet truck entry for easy transport. Stack and nest to save storage space. Color: black.

    Learn More
  2. VESTIL Plastic Pallets

    VESTIL Plastic Pallets stack for space-saving storage. Maintenance-free pallet is made of virgin polyethylene and is safer to handle than wood pallets. Serrated deck has holes for drainage. Ideal for pharmaceutical, medical, and food applications.

    Learn More
  3. ORBIS Rackstar II Pallets

    Completely encapsulated design increases racking strength. Bottom stringers are repairable and easily replaced. Will not absorb moisture and is easy to steam clean. Recyclable. Four-way fork entry.

    IN STOCK.
    Unique design makes these ORBIS® Rackstar II Pallets ideal for racking systems or conveyors.

    Completely encapsulated design allows for a smooth top and increased racking strength. Bottom stringers are repairable and easily replaced. Durable and impact-resistant. Will not absorb moisture and is easy to steam clean. 100% recyclable polyethylene structural foam. Hand holds and 4-way fork entry ease transport of fully loaded pallets. Stackable and rackable.
    NOTE: Flat type model has 16 rubber grommets to prevent slipping.
    NOTE: Pallet capacities when used with the following pallet rack styles: 6000-lb. capacity on pallet rack with decking; 6000-lb. capacity on crossbar supported pallet rack; 3000-lb. capacity on beam edge supported pallet rack. Capacities are based on an evenly distributed load.

    Learn More
  4. ORBIS FM-Approved Pallet

    Open-grid design. Four-way fork entry. Meets fire rating requirements equivalent to wood pallets. Color: black.

    Pallet Rack Compatibility

    We can help you choose the right pallet for your existing rack. Please call for more assistance.

    FACTORY QUICK SHIP.
    ORBIS® FM-Approved Pallet has the FM-Approved logo stamped onto each pallet.

    Meets fire rating requirements equivalent to wood pallets. 100% recyclable high-density structural foam. Stackable. Open-grid design. Four-way fork entry. Rackable. Color: black.

    NOTE: Pallet capacities when used with the following pallet rack styles: 5000-lb. capacity on pallet rack with decking; 5000-lb. capacity on crossbar supported pallet rack; 1500-lb. capacity on beam edge supported pallet rack. Capacities are based on an evenly distributed load.

    Learn More
  5. JIFRAM Recycled Plastic Pallets

    Flame-retardant pallets are impervious to bug infestations and extreme climates. Ideal for international shipments. 8" between two center stringers. Includes slip-resistant surface. Custom sizes like 44x44" and 48x48" are available, call for information.

    (See page 426 for quick reference symbols.)

    FACTORY QUICK SHIP.
    Built to stand up to years of continuous use in all work conditions, JIFRAM Recycled Plastic Pallets are flame-retardant and impervious to bug infestations and extreme climates. Ideal for international shipments. 8" between two center stringers. Includes slip-resistant surface. Custom sizes like 44x44" and 48x48" are available, call for information.

    QUICK-REFERENCE GUIDE FOR ALL PLASTIC PALLETS
    Capacity Definitions:
    Fork—The maximum weight capacity that can be sustained by a pallet during transport on a forklift, a hand jack, or in a truck.
    Floor—The maximum weight capacity that can be sustained by a fully supported pallet, i.e. one resting on the floor or stacked for a long period of time.
    *Note: Capacities only apply when load is evenly distributed
    Manufacturing Process Definitions:
    Structural Foam—Plastic and gas are injected into a mold. These materials combine to create a cellular core surrounded by a smooth outer skin. Offers high floor load capacity.
    Single- or Twin-Sheet Thermoforming—A sheet or sheets of plastic are heated and then drawn by vacuum over a mold and then fused together through pressure to form a single, welded part. Offers high impact strength.
    Solid-Wall Molding—Powdered plastic is added to a closed-cavity mold and the mold is rotated on all axis while heat is applied. The mold is then cooled. This produces a solid wall, hollow plastic part. Offers high-impact strength and long life.
    Extrusion Molding—Plastic pellets are melted and extruded through steel dies forming a solid wall hollow pallet profile. Economical.
    Injection Molding—Plastic is injected, under pressure, into a mold. This process produces a solid wall, solid core part. Offers high durability.

    Learn More
  6. Snap-Together Double-Deck Plastic Pallets

    Save significantly on freight charges when you order unassembled pallets. Runners or base must be snapped on when the pallet arrives. Resistant to insects, bacteria, and fungi. Pallets are ISPM15 exempt.

    (See page 426 for quick reference symbols.)

    IN STOCK.
    Save significantly on freight charges by ordering unassembled Snap-Together Double-Deck Plastic Pallets. Runners or base must be snapped on when the pallet arrives, depending on the style you choose. 100% recyclable injection-molded polyethylene and polypropylene. Blended polyethylene and polypropylene construction is resistant to insects, bacteria, and fungi. Pallets are ISPM15 exempt. Stackable.

    Learn More
  7. ORBIS Drum Pallets

    Recessed 3/8" high rings let you position standard 55-gallon drums. Flow-through open-grid design with underside runners. Four-way fork entry.

    SELECTED MODELS IN STOCK. Other FACTORY QUICK SHIP.
    ORBIS® Plastic Drum Pallets feature four recessed 3/8" high rings that let you positively position standard 55-gallon drums. Prevents drum movement during transport. One-piece high-density polyethylene structural foam pallet is reusable and recyclable. Flow-through open-grid design cleans easily. 3/8" high rings on underside runners help to set drums for double stacking. Four-way entry for fork truck or pallet jacks.

    Learn More
  8. ORBIS Specialty-Size Pallets

    Designed to work on most conveyors and pallet lifts. Tapered four-way fork entry. Resistant to common chemicals, insects, and moisture. Not rackable.

    FACTORY QUICK SHIP.
    ORBIS® Specialty-Size Plastic Pallets are made in sizes not available on other competitors’ models. Designed to work with most conveyors and palletizers, 100% recyclable structural foam pallets handle many types of products including beverage containers and rigid packages. Tapered 4-way entry. Resistant to common chemicals, insects, and moisture. Stackable, not rackable.

    Learn More
  9. ORBIS Double-Deck Pallet

    Double-deck design permits greater stability and support of heavy loads. Compatible with a broad range of conveyor systems and automated material handling equipment. Four-way fork entry. Not rackable.

    IN STOCK.
    ORBIS® Double-Deck Plastic Pallet permits greater stability and support of heavy loads. 100% recyclable structural foam construction means pallet will not absorb moisture and is easy to clean and repair. Compatible with a broad range of conveyor systems and automated material handling equipment. 4-way fork and pallet truck entry. Stackable—not rackable.

    Learn More
  10. ORBIS Export Pallets

    Designed for international shipments, all-plastic pallet eliminates the need for heat treatment and fumigation required for wood pallets. Smooth surfaces reduce damage to stored products. Four-way fork entry. Pallets are ISPM 15 exempt.

    IN STOCK.
    ORBIS® Export Pallets are a low-cost, lightweight alternative to wood pallets for international shipping.

    Made from 100% recycled high-density polyethylene. All-plastic pallet eliminates the need for heat treatment and fumigation required for wood pallets. Smooth surfaces reduce damage to stored products. Four-way fork entry. Nestable. Pallets are ISPM 15 exempt.

    QUICK-REFERENCE GUIDE FOR ALL PLASTIC PALLETS
    Capacity Definitions:
    Fork—The maximum weight capacity that can be sustained by a pallet during transport on a forklift, a hand jack, or in a truck.
    Floor—The maximum weight capacity that can be sustained by a fully supported pallet, i.e. one resting on the floor or stacked for a long period of time.
    *Note: Capacities only apply when load is evenly distributed
    Manufacturing Process Definitions:
    Structural Foam—Plastic and gas are injected into a mold. These materials combine to create a cellular core surrounded by a smooth outer skin. Offers high floor load capacity.
    Single- or Twin-Sheet Thermoforming—A sheet or sheets of plastic are heated and then drawn by vacuum over a mold and then fused together through pressure to form a single, welded part. Offers high impact strength.
    Solid-Wall Molding—Powdered plastic is added to a closed-cavity mold and the mold is rotated on all axis while heat is applied. The mold is then cooled. This produces a solid wall, hollow plastic part. Offers high-impact strength and long life.
    Injection Molding—Plastic is injected, under pressure, into a mold. This process produces a solid wall, solid core part. Offers high durability.

    Learn More
  11. One-Way Shipping Pallets

    Do not need expensive heat treatments, fumigations or certification stamps when exporting anywhere. Resists insects, bacteria, and fungi. Four-way fork entry. Special export size pallets in millimeter sizes meet USA and overseas shipping regulations. Pallets are ISPM 15 exempt. Color: black.

    IN STOCK.
    Made of 100% regenerated plastics, environmentally friendly One-Way Shipping Pallet is completely recyclable.

    Do not need expensive heat treatments, fumigations or certification stamps when exporting anywhere. Injection-molded polyethylene and polypropylene construction is resistant to insects, bacteria, and fungi. Four-sided entry for forklifts. Nestable pallets save storage space. Order standard or special export size pallets in millimeter sizes that meet USA and overseas shipping regulations. Pallets are ISPM 15 exempt. Color: black.

    QUICK-REFERENCE GUIDE FOR ALL PLASTIC PALLETS
    Capacity Definitions:
    Fork—The maximum weight capacity that can be sustained by a pallet during transport on a forklift, a hand jack, or in a truck.
    Floor—The maximum weight capacity that can be sustained by a fully supported pallet, i.e. one resting on the floor or stacked for a long period of time.
    *Note: Capacities only apply when load is evenly distributed
    Manufacturing Process Definitions:
    Structural Foam—Plastic and gas are injected into a mold. These materials combine to create a cellular core surrounded by a smooth outer skin. Offers high floor load capacity.
    Single- or Twin-Sheet Thermoforming—A sheet or sheets of plastic are heated and then drawn by vacuum over a mold and then fused together through pressure to form a single, welded part. Offers high impact strength.
    Solid-Wall Molding—Powdered plastic is added to a closed-cavity mold and the mold is rotated on all axis while heat is applied. The mold is then cooled. This produces a solid wall, hollow plastic part. Offers high-impact strength and long life.
    Injection Molding—Plastic is injected, under pressure, into a mold. This process produces a solid wall, solid core part. Offers high durability.

    Learn More
  12. Nestable Recyclable Pallet

    Leg drain holes prevent liquids from accumulating. Steam-cleanable and weather-resistant. Four way fork entry.

    IN STOCK.
    Lightweight Nestable, Recyclable Pallet is made from 100% recyclable injection-molded polyethylene. Leg drain holes will prevent liquids from accumulating. Steam-cleanable and weather-resistant. 4-sided entry for forklifts and hand pallet trucks. Ideal for one-way shipping, especially to countries that require the pallet to be fumigated.

    QUICK-REFERENCE GUIDE FOR ALL PLASTIC PALLETS
    Capacity Definitions:
    Fork—The maximum weight capacity that can be sustained by a pallet during transport on a forklift, a hand jack, or in a truck.
    Floor—The maximum weight capacity that can be sustained by a fully supported pallet, i.e. one resting on the floor or stacked for a long period of time.
    *Note: Capacities only apply when load is evenly distributed
    Manufacturing Process Definitions:
    Structural Foam—Plastic and gas are injected into a mold. These materials combine to create a cellular core surrounded by a smooth outer skin. Offers high floor load capacity.
    Single- or Twin-Sheet Thermoforming—A sheet or sheets of plastic are heated and then drawn by vacuum over a mold and then fused together through pressure to form a single, welded part. Offers high impact strength.
    Solid-Wall Molding—Powdered plastic is added to a closed-cavity mold and the mold is rotated on all axis while heat is applied. The mold is then cooled. This produces a solid wall, hollow plastic part. Offers high-impact strength and long life.
    Injection Molding—Plastic is injected, under pressure, into a mold. This process produces a solid wall, solid core part. Offers high durability.

    Learn More
  13. ORBIS Injection Molded Pallets

    Flow-through design is easy to steam clean. Choose either flat top model or pallet with 1" intermittent lip. Four-way fork entry. Weather-resistant. Pallets are ISPM 15 exempt. Color: black.

    IN STOCK.
    Economical,ORBIS® Injection Molded Pallets feature flow-through design making them easy to steam clean.

    Weather-resistant. Four-way entry for forklifts and hand trucks. 100% recyclable pallets nest to save space when not in use. 2.5:1 nesting ratio. Choose either flat top model or pallet with 1" intermittent lip. Pallets are ISPM15 exempt. Color: black.

    Learn More
  14. ORBIS Lightweight Structural Foam Pallet

    Flow-through design promotes drainage. 5/8" raised edge surrounds deck. 20% recycled materials. 27 pallets stack to approximately 48" high. Color: black.

    Quick-Reference Guide for All Plastic Pallets
    Capacity Definitions:
    Fork—The maximum weight capacity that can be sustained by a pallet during transport on a forklift, a hand jack, or in a truck. Also called dynamic capacity.
    Floor—The maximum weight capacity that can be sustained by a fully supported pallet, i.e. one resting on the floor or stacked for a long period of time. Also called static capacity.
    *Note: Capacities only apply when load is evenly distributed
    Manufacturing Process Definitions:
    Structural Foam—Plastic and gas are injected into a mold. These materials combine to create a cellular core surrounded by a smooth outer skin. Offers high floor load capacity.
    Solid-Wall Molding—Powdered plastic is added to a closed-cavity mold and the mold is rotated on all axis while heat is applied. The mold is then cooled. This produces a solid wall, hollow plastic part. Offers high-impact strength and long life.
    Extrusion Molding—Plastic pellets are melted and extruded through steel dies forming a solid wall hollow pallet profile. Economical.
    Injection Molding—Plastic is injected, under pressure, into a mold. This process produces a solid wall, solid core part. Offers high durability.

    IN STOCK.
    Cost-efficient ORBIS® Lightweight Structural Foam Pallet features a 5/8" raised edge surrounding the deck to prevent loads from shifting.

    Single face, one-piece construction of 100% recyclable structural foam that incorporates at least 20% recycled materials. Plastic pallets nest for space-saving storage—27 pallets stack to approximately 48" high. Features a flow-through design for to promote drainage, easy cleanability and air flow in food applications. Color: black.

    Learn More
  15. ORBIS Heavy-Duty Structural Foam Pallets

    Will not absorb liquids or moisture. Lightweight and easy to clean. 4-way fork access. Color: black.

    Quick-Reference Guide for All Plastic Pallets
    Capacity Definitions:
    Fork—The maximum weight capacity that can be sustained by a pallet during transport on a forklift, a hand jack, or in a truck. Also called dynamic capacity.
    Floor—The maximum weight capacity that can be sustained by a fully supported pallet, i.e. one resting on the floor or stacked for a long period of time. Also called static capacity.
    *Note: Capacities only apply when load is evenly distributed
    Manufacturing Process Definitions:
    Structural Foam—Plastic and gas are injected into a mold. These materials combine to create a cellular core surrounded by a smooth outer skin. Offers high floor load capacity.
    Solid-Wall Molding—Powdered plastic is added to a closed-cavity mold and the mold is rotated on all axis while heat is applied. The mold is then cooled. This produces a solid wall, hollow plastic part. Offers high-impact strength and long life.
    Extrusion Molding—Plastic pellets are melted and extruded through steel dies forming a solid wall hollow pallet profile. Economical.
    Injection Molding—Plastic is injected, under pressure, into a mold. This process produces a solid wall, solid core part. Offers high durability.

    SELECTED MODELS IN STOCK. Others FACTORY QUICK SHIP.
    Favored over wood in many industrial and food processing applications, the ORBIS® Heavy-Duty Structural Foam Pallets eliminate loose nails, pesky splinters, mold and mildew, uneven sizes and shapes.

    100% recyclable structural foam pallets won’t absorb moisture and liquids. Lightweight and easy to clean. Nestable to save space. 4-way fork access. Color: black.

    Learn More
  16. STRATIS Heavy-Duty Rackable Pallets

    May be racked on both selective and beam edge racks. Solid-wall pallets feature open bottoms with hidden molded-in reinforcements. Withstands temperatures as low as -40°F. Four-way fork entry. Blue model features 100% virgin colorants/pigments that have been approved to meet FDA standards.

    IN STOCK.
    STRATIS® Solid-Wall Plastic Pallets are designed for the most abusive environments.

    Feature open bottoms with hidden molded-in reinforcements that allow racking in both selective and beam edge racks. One-piece 100% recyclable solid-wall molded plastic is ideal for rough WIP freezers (operates to -40°F) and heavy manufacturing. Four-way fork entry. Handholds ease transport. Stackable and rackable. Choose either economical black or 100% virgin blue with colorants/pigments approved to meet FDA standards.

    NOTE: Pallet capacities when used with the following pallet rack styles: 6000-lb. capacity on pallet rack with decking; 6000-lb. capacity on crossbar supported pallet rack; 3500-lb. capacity on beam edge supported pallet rack. Capacities are based on an evenly distributed load.

    Learn More
  17. ORBIS Rackstar Pallets

    Double-deck, open-grid design is ideal for the food service industry. Available with 1/2" interrupted lip on the top deck. Four-way fork entry.

    IN STOCK.
    Double-deck design and open grid allow for easy cleaning, making these ORBIS® Rackstar™ Pallets ideal for the food service industry.

    One-piece 100% recyclable polyethylene construction. Available with 1/2" interrupted lip on the top deck for extra load stability. Four-way accessibility for forklift and hand pallet trucks. Stackable and rackable. Flat models will take up to 14 grommets (sold separately).

    NOTE: Pallet capacities when used with the following pallet rack styles: 5000-lb. capacity on pallet rack with decking; 5000-lb. capacity on crossbar supported pallet rack; 2000-lb. capacity on beam edge supported pallet rack. Capacities are based on an evenly distributed load.
    NOTE: Blue pallets are made with 100% virgin material with colorants/pigments that have been approved to meet FDA standards.

    Learn More
  18. PLASTIC PALLET/SKID

    This innovative design unites two essential product features; capacity and versatility. Pallet/Skid entry provides 4-way entry, 2-way by pallet truck and 4-way by fork truck. The fork opening is 11-3/4" W. x 3-1/4" H. The skid opening is 10-1/2" W. x 3-3/4" H. Features anti-slide grommets which prevent the pallets from sliding off the forks and each other during transit. Overall size is 40" x 48" x 6". FOB Shipping Point. Learn More
  19. PLASTIC PALLETS & SKIDS

    • Stackable for efficient space-saving storage.
    • Made of virgin polyurethane for longer life.
    Learn More
  20. ORBIS Rackstar Pallet

    Double-deck, open-grid design is ideal for the food service industry. Available with 1/2" interrupted lip on the top deck. Four-way fork entry.

    IN STOCK.
    Learn More
  21. NESTABLE PRESSWOOD PALLETS

    Nestable presswood pallets are great for hundreds of applications. Special nestable design allows for stacking, 50 pallets only 86" high. Meets ISPM 15 export specifications. Rounded corners increase life expectancy. Lightweight design weighs 60% less than conventional wood pallets. Does not contain any nails or staples. Manufactured from recycled wood materials. Environmentally responsible. FOB Shipping Point. Learn More
  22. Nestable Presswood Pallets

    60% lighter than hardwood pallets. Dry deck design eliminates the need for moisture barrier sheets. Stack of 50 nested pallets measures only 7'H. Four-way fork entry. Special export size pallets in millimeter sizes meet USA and overseas shipping per ISPM 15 regulations.

    Molded from a mixture of wood fiber and synthetic resins, these Nestable Presswood Pallets are 60% lighter than hardwood pallets. Practical dry deck design eliminates the need for moisture barrier sheets, and there are no nails or splinters to harm employees or damage shipments. Rounded edges also protect packaging. Saves storage space—a stack of 50 nested presswood pallets measures only 7'H. Four-way forklift entry. Order standard or special export European size pallets in millimeter sizes that meet USA and overseas shipping per ISPM 15 regulations.

    Learn More
  23. PROTECTA-PACK SYSTEMS Corrugated Pallets

    A stack of 100 pallets measures only 57"H. High-density polyethylene legs. Weighs less than 6 lbs. ISPM 15 exempt for export shipping. Order in quantities of 10, priced each.

    IN STOCK.
    Don’t let the cardboard construction fool you—these PROTECTA-PACK SYSTEMS Corrugated Pallets will hold up to 1200 lbs. Corrugated deck is supported by high-density polyethylene legs to eliminate moisture absorption and accommodate a variety of deck material. Saves storage space—a stack of 100 pallets measures only 57"H. Because each pallet weighs less than 6 lbs., all employees can lift them without fear of injury. ISPM 15 exempt for export shipping. Order in quantities of 10, priced each.

    NOTE: 40x30" pallets also available. Call for more information.

    Learn More
  24. Hardwood Pallets

    Computerized nailing system promotes uniform durability. 9/16" thick planks are supported by three 48"Lx3-5/8"H, 1-1/4" thick stringers. Notched for 4-way fork entry. Meets GMA standard. Order in quantities of 10, priced each.

    IN STOCK.
    96x40" pallet is perfect for storing pallet rack beams, uprights, or other long materials.

    Hardwood Pallets are economical alternatives to wire or plastic pallets. Tough, durable construction comprised of choice maple, oak, and birch (non-coniferous) hardwoods. Computerized nailing system promotes uniform durability. 9/16" thick planks are supported by three 48"Lx3-5/8"H, 1-1/4" thick stringers. Notched for 4-way fork entry. Meets GMA standard. Order in quantities of 10, priced each.

    Learn More

25 Item(s)

List  Grid 

Set Descending Direction