0

1-888-392-7867
For assistance, call toll free

Stainless Steel Work Benches & Tables

10 Item(s)

List  Grid 

Set Descending Direction
  1. SS SERIES STAINLESS STEEL WORKTABLES

    • Designed for extra-sanitary uses and high moisture areas.
    • Superior construction features deliver long wearing use.
    Learn More
  2. Economical Type 430 Stainless Steel Worktables

    A more cost-efficient option for wet, corrosive environments. Highly corrosion-resistant unless exposed to certain chemicals and liquids over a long period of time. Top is supported underneath by reinforcing channels that run the entire width. 1-5/8" dia. legs. NSF listed.

    Specify: (01) without backsplash, (02) with 1-1/2"H backsplash. (01) WITHOUT BACKSPLASH IS IN STOCK.
    Here’s an economical alternative to Type 304 stainless steel tables. Highly corrosion-resistant unless exposed to certain chemicals and liquids over a long period of time. Top is supported underneath by reinforcing channels that run the entire width. 18-gauge stainless steel top; 16-gauge stainless steel legs; 18-gauge galvanized steel lower shelf. 1-5/8" dia. legs. NSF listed.

    Learn More
  3. Type 304 Stainless Steel Worktables

    Premium worktables: stainless steel top, lower shelf, and legs.

    Sanitary, rust-resistant tables are ideal for use in wet, corrosive environments. All tops are made of high-quality Type 304 stainless steel that is nearly impossible to corrode and withstands harsh environments better than all other types of stainless steel. Reinforced 1x2" tubing runs entire length of worksurface for extra rigidity. Standard 18-ga. fixed lower shelf is 12" from floor. 36"H table is supported by 1-5/8" dia., 16-ga. legs with adjustable bullet feet. NSF listed. Ships unassembled.

    Premium worktables: stainless steel top with 6"H backsplash, lower shelf and legs.

    Sanitary, rust-resistant tables are ideal for use in wet, corrosive environments. All tops are made of high-quality Type 304 stainless steel that is nearly impossible to corrode and withstands harsh environments better than all other types of stainless steel. Stallion Front Edge: 1-1/2", 45° tapered front edge means no sharp edges to cause injury. Extremely sanitary—won’t trap dirt or food particles.Reinforced 1x2" tubing runs entire length of worksurface. Fixed lower shelf is 12" from floor. Table is supported by 1-5/8" dia. legs with adjustable bullet feet. NSF listed. Ships unassembled. Includes: stainless steel top with 6"H backsplash, lower shelf and legs.

    Economical worktables: stainless steel top, galvanized lower shelf and legs.

    Sanitary, rust-resistant tables are ideal for use in wet, corrosive environments. All tops are made of high-quality Type 304 stainless steel that is nearly impossible to corrode and withstands harsh environments better than all other types of stainless steel. Stallion Front Edge: 1-1/2", 45° tapered front edge means no sharp edges to cause injury. Extremely sanitary—won’t trap dirt or food particles.Reinforced 1x2" tubing runs entire length of worksurface. Fixed lower shelf is 12" from floor. Table is supported by 1-5/8" dia. legs with adjustable bullet feet. NSF listed. Ships unassembled. Includes: stainless steel top, galvanized lower shelf and legs.

    Economical worktables: stainless steel top with 6"H backsplash, galvanized lower shelf and legs.

    Sanitary, rust-resistant tables are ideal for use in wet, corrosive environments. All tops are made of high-quality Type 304 stainless steel that is nearly impossible to corrode and withstands harsh environments better than all other types of stainless steel. Stallion Front Edge: 1-1/2", 45° tapered front edge means no sharp edges to cause injury. Extremely sanitary—won’t trap dirt or food particles.Reinforced 1x2" tubing runs entire length of worksurface. Fixed lower shelf is 12" from floor. Table is supported by 1-5/8" dia. legs with adjustable bullet feet. NSF listed. Ships unassembled. Includes: stainless steel top with 6"H backsplash, galvanized lower shelf and legs.

    Accessories:

    Nearly impossible to corrode and withstands harsh environments better than all other types of stainless steel. Reinforced 1x2" tubing runs entire length of worksurface. Fixed lower shelf is 12" from floor. Table is supported by 1-5/8" dia. legs with adjustable bullet feet. NSF listed.

    SELECTED MODELS IN STOCK.
    Learn More
  4. Model XW - Stainless Work Stand

    • All welded construction (except casters).
    • 304 stainless with premium #4 polished shelves in durable 16 gauge.
    • 1-1/2" x 14 gauge thick stainless corner angle, and caster mounts with "twin caster hole pattern" to mount various sized casters.
    • Bolt on casters, 2 swivel & 2 rigid, for superior tracking - see specifications chart.
    • Caster rigs available in steel or stainless for urethane wheels and steel only for full pneumatic wheels.
    • 1-1/2" shelf lips down (flush).
    • Pre-punched mounting pads.
    • Top shelf height - 30".
    • Clearance between shelves - 20".
    •  
    Learn More
  5. KMS SERIES STAINLESS STEEL WORKTABLES

    • Designed for extra-sanitary uses and high moisture areas.
    • Superior construction features deliver long wearing use.
    Learn More
  6. GLG SERIES STAINLESS STEEL WORKTABLE

    • Designed for extra-sanitary uses and high moisture areas.
    • Superior construction features deliver long wearing use.
    Learn More
  7. Corrosion-Resistant Worktables

    Worktables

    Specify: (01) without lower shelf, (02) with lower shelf.
    You’re sure to find the rust- and corrosion-resistant table you need among these reliable Corrosion-Resistant Worktables.

    High-quality 16-ga. Type 304 stainless steel legs resist most chemicals and solvents. 1-5/8" dia. legs are 1-5/8" dia. feature adjustable leveling feet for stability. 36"H overall. Four tops to choose from: 1-1/2" thick Type 304 stainless steel with 1-7/16" thick MDF core and welded, smooth stainless steel edge and melamine backer sheet; 1-1/4"thick Type 304 stainless steel with industrial strength particleboard core and hard rubber T-mold edge and backer sheet; virtually indestructible 1-3/4" thick wear-resistant maple is laminated clear through and electronically thermobonded with Varnique finish; 1-1/2" thick plastic laminate with industrial-grade 45-lb. density particleboard core and durable hardwood bands around the edges. Ships unassembled.

    NOTE: Stainless steel top and edge table shown with optional caster kit (sold separately).

    Leg Kits

    For use with the bench top of your choice. Stainless steel legs available with or without lower shelf. 34"H.

    Accessories

    1-5/8" dia. legs have adjustable leveling feet. 36"H overall. Top choices: 1-1/2" thick Type 304 stainless steel with 1-7/16" thick MDF core and welded, smooth stainless steel edge and melamine backer sheet; 1-1/4" thick Type 304 stainless steel with industrial strength particleboard core and hard rubber T-mold edge and backer sheet; 1-3/4" thick wear-resistant maple is laminated clear through and electronically thermobonded with Varnique finish; 1-1/2" thick plastic laminate with industrial-grade 45-lb. density particleboard core and durable hardwood bands around the edges.

    IN STOCK.
    Learn More
  8. ENCLOSED BASE WORKTABLES

    • Designed for extra-sanitary uses and high moisture areas.
    • Superior construction features deliver long wearing use.
    Learn More
  9. Stainless Steel Worktables with Sink

    Combines the durability and sanitary properties of stainless steel with the convenience of a sink. Tops feature a 1-1/2", 45° tapered front edge. 1x2" support tubing runs underneath the entire worksurface. 1-5/8" dia. legs have adjustable feet. 36"H overall. NSF-listed. Ships with sink installed. Included faucet needs to be installed.

    Specify sink location: (01) left, (02) middle, (03) right.
    Stainless Steel Worktables with Sink combine the durability and sanitary properties of stainless steel with the convenience of a sink.

    High-quality 16-gauge Type 304 stainless steel. 16-gauge stainless steel. Tops feature a 1-1/2", 45° tapered front edge. 1x2" support tubing runs underneath the entire worksurface. 1-5/8" dia. legs have adjustable feet. 36"H overall. NSF-listed. Ships with sink installed. Included faucet needs to be installed. 5521600-T and 5522000-T include 6 legs. Sink installation on left or right only. Unassembled.

    NOTE: All stainless steel worktables with sinks are not returnable.

    Learn More
  10. STAINLESS STEEL SINKS

    Self-standing mop sink is made of heavy gauge stainless steel with stainless steel tubular legs. Multi-Purpose Scullery Sinks are constructed of type 430 stainless steel with galvanized tubular legs. Both self-standing sinks feature 8"H. backspash, 1" adjustable feet. Includes 1-1/2" basket type waste drain. Faucets on all sinks mount easily on 8" centers ­1/2" hot and cold supply. FOB Shipping Point. Learn More

10 Item(s)

List  Grid 

Set Descending Direction